← All missions

sea068_20241119T1122_D

QC

sea068_20241119T1122_D.ncgenerated 2026-11-12 14:36 UTC

Platform serial
SEA068
Profiles
1006 (503 dive, 503 climb)
Start
2024-11-19 11:22
End
2024-12-17 23:07
Duration
28d 11h
Dive depth
1–429 m
Lat
58.16°N–58.59°N
Lon
18.20°E–18.96°E
Sampling
1 s
Records
2,416,412
Size
899.2 MB
glidertest
(1) QC — glidertest diagnostics (2) Gross range (T–S) (3) QC — TEMP (4) QC — PSAL (5) QC — DOXY (6) QC — CHLA

(1) QC — glidertest diagnostics

Profile number: No issues detected. Profile duration: 51 profiles have abnormal duration.

glidertest diagnostics — run on the fly, not written to the file. Thresholds are glidertest's defaults unless a report config overrides them, shown so the verdict can be reproduced.

VariableTestSuspect range / thresholdFail range / thresholdSource
TEMPgross-range[0, 30][-2.5, 40]default
TEMPspike|Δ| > 2.0|Δ| > 6.0default
TEMPflat-lineflat ≥ 30 s (tol ±0.0005)flat ≥ 60 s (tol ±0.0005)default
TEMPhysteresis> 5% dive–climb error per depth bin> 5 bins exceeddefault
PSALgross-range[5, 38][2, 41]default
PSALspike|Δ| > 0.3|Δ| > 0.9default
PSALflat-lineflat ≥ 30 s (tol ±0.0005)flat ≥ 60 s (tol ±0.0005)default
PSALhysteresis> 5% dive–climb error per depth bin> 5 bins exceeddefault
DOXYgross-range[0, 350][0, 500]default
DOXYspike|Δ| > 10|Δ| > 50default
DOXYflat-lineflat ≥ 30 s (tol ±0.01)flat ≥ 60 s (tol ±0.01)default
DOXYhysteresis> 5% dive–climb error per depth bin> 5 bins exceeddefault
CHLAgross-range[0, 15][-1, 20]default
CHLAspike|Δ| > 1|Δ| > 5default
CHLAflat-lineflat ≥ 30 s (tol ±0.01)flat ≥ 60 s (tol ±0.01)default
CHLAhysteresis> 5% dive–climb error per depth bin> 5 bins exceeddefault

Test × variable: flagged-sample counts (per-sample tests show a small dashed bar). Gross range applies the suspect span only — the fail span above is not yet evaluated. Hysteresis counts depth bins with >5% dive–climb error; a variable is flagged when more than 5 bins exceed it.

TestTEMPPSALDOXYCHLA
Gross rangeclean356 susp 1,620 fail
330,200 susp
731 susp 143 fail
Spikeclean585 susp 1,531 fail
247 susp
612 susp 69 fail
Flat line17,133 susp 3,649 fail
295 susp 585 fail
15,010 susp 1,423,027 fail
clean
Hysteresis (mean)0/432 bins0/432 bins19/432 bins25/432 bins
Hysteresis (range)0/432 bins0/432 bins2/432 bins28/432 bins

(2) Gross range (T–S)

Gross-range suspect and fail spans on the T–S diagram (TEMP × PSAL)
Gross-range suspect and fail spans on the T–S diagram (TEMP × PSAL)
source: glidertest/plots_qc.py:plot_ts_gross_range

Current gross-range limits (applied)

  • TEMP — suspect [0, 30], fail [-2.5, 40]
  • PSAL — suspect [5, 38], fail [2, 41]

Suggested gross-range limits (this deployment) — copy into your config

Each span is the central 99.9% of the finite values padded by 1% (suspect) and 5% (fail) of that span. Users should verify that the recommended choices are appropriate for their dataset.

(3) QC — TEMP

TEMP: where glidertest's QC tests fire (gross range, spike, flat line) over the full record
TEMP: where glidertest's QC tests fire (gross range, spike, flat line) over the full record
source: glidertest/plots_qc.py:plot_test_hits
TEMP against depth: where the QC tests fire in the water column
TEMP against depth: where the QC tests fire in the water column
source: glidertest/plots_qc.py:plot_flag_profile

Current limits (applied)

  • TEMP flat line — suspect ≥ 30 s, fail ≥ 60 s (tol ±0.0005)
  • TEMP spike — suspect Δ > 2, fail Δ > 6

Suggested limits (this deployment) — copy into your config

TEMP is sampled about every 1 s; a flat-line window needs to span a couple of its samples, so the suggested suspect is 10× and fail 20× that interval (a window shorter than the sampling flags every point). This is a starting point: if it flags too many points as flat-line, lengthen the window (raise suspect_threshold / fail_threshold) or lower the tolerance. The TEMP spike thresholds are not mission-derived; the applied values are shown so you can loosen them (raise suspect_threshold / fail_threshold) if real features are flagged. Users should verify that the recommended choices are appropriate for their dataset.

Flat-line runs

TEMP: flat-run durations against the test windows and the median sampling interval
TEMP: flat-run durations against the test windows and the median sampling interval
source: glidertest/plots_qc.py:plot_flat_runs
TEMP: start-to-end change of each flat run against the tolerance (stuck sensor vs slow signal)
TEMP: start-to-end change of each flat run against the tolerance (stuck sensor vs slow signal)
source: glidertest/plots_qc.py:plot_flat_change
TEMP: zoom on the longest flagged flat run, with the ±tolerance band
TEMP: zoom on the longest flagged flat run, with the ±tolerance band
source: glidertest/plots_qc.py:plot_flat_excerpt

Spike

TEMP: spike statistic against the suspect and fail thresholds
TEMP: spike statistic against the suspect and fail thresholds
source: glidertest/plots_qc.py:plot_spike_stat

(4) QC — PSAL

PSAL: where glidertest's QC tests fire (gross range, spike, flat line) over the full record
PSAL: where glidertest's QC tests fire (gross range, spike, flat line) over the full record
source: glidertest/plots_qc.py:plot_test_hits
PSAL against depth: where the QC tests fire in the water column
PSAL against depth: where the QC tests fire in the water column
source: glidertest/plots_qc.py:plot_flag_profile

Current limits (applied)

  • PSAL flat line — suspect ≥ 30 s, fail ≥ 60 s (tol ±0.0005)
  • PSAL spike — suspect Δ > 0.3, fail Δ > 0.9

Suggested limits (this deployment) — copy into your config

PSAL is sampled about every 1 s; a flat-line window needs to span a couple of its samples, so the suggested suspect is 10× and fail 20× that interval (a window shorter than the sampling flags every point). This is a starting point: if it flags too many points as flat-line, lengthen the window (raise suspect_threshold / fail_threshold) or lower the tolerance. The PSAL spike thresholds are not mission-derived; the applied values are shown so you can loosen them (raise suspect_threshold / fail_threshold) if real features are flagged. Users should verify that the recommended choices are appropriate for their dataset.

Flat-line runs

PSAL: flat-run durations against the test windows and the median sampling interval
PSAL: flat-run durations against the test windows and the median sampling interval
source: glidertest/plots_qc.py:plot_flat_runs
PSAL: start-to-end change of each flat run against the tolerance (stuck sensor vs slow signal)
PSAL: start-to-end change of each flat run against the tolerance (stuck sensor vs slow signal)
source: glidertest/plots_qc.py:plot_flat_change
PSAL: zoom on the longest flagged flat run, with the ±tolerance band
PSAL: zoom on the longest flagged flat run, with the ±tolerance band
source: glidertest/plots_qc.py:plot_flat_excerpt

Spike

PSAL: spike statistic against the suspect and fail thresholds
PSAL: spike statistic against the suspect and fail thresholds
source: glidertest/plots_qc.py:plot_spike_stat

(5) QC — DOXY

DOXY: where glidertest's QC tests fire (gross range, spike, flat line) over the full record
DOXY: where glidertest's QC tests fire (gross range, spike, flat line) over the full record
source: glidertest/plots_qc.py:plot_test_hits
DOXY against depth: where the QC tests fire in the water column
DOXY against depth: where the QC tests fire in the water column
source: glidertest/plots_qc.py:plot_flag_profile

Current limits (applied)

  • DOXY gross range — suspect [0, 350], fail [0, 500]
  • DOXY flat line — suspect ≥ 30 s, fail ≥ 60 s (tol ±0.01)
  • DOXY spike — suspect Δ > 10, fail Δ > 50

Suggested limits (this deployment) — copy into your config

The gross span is the central 99.9% of the finite values ([0.0, 368.68]) padded by 1% (suspect) and 5% (fail) of that span (lower bound clamped at 0). DOXY is sampled about every 1 s; a flat-line window needs to span a couple of its samples, so the suggested suspect is 10× and fail 20× that interval (a window shorter than the sampling flags every point). This is a starting point: if it flags too many points as flat-line, lengthen the window (raise suspect_threshold / fail_threshold) or lower the tolerance. The DOXY spike thresholds are not mission-derived; the applied values are shown so you can loosen them (raise suspect_threshold / fail_threshold) if real features are flagged. Users should verify that the recommended choices are appropriate for their dataset.

Flat-line runs

DOXY: flat-run durations against the test windows and the median sampling interval
DOXY: flat-run durations against the test windows and the median sampling interval
source: glidertest/plots_qc.py:plot_flat_runs
DOXY: start-to-end change of each flat run against the tolerance (stuck sensor vs slow signal)
DOXY: start-to-end change of each flat run against the tolerance (stuck sensor vs slow signal)
source: glidertest/plots_qc.py:plot_flat_change
DOXY: zoom on the longest flagged flat run, with the ±tolerance band
DOXY: zoom on the longest flagged flat run, with the ±tolerance band
source: glidertest/plots_qc.py:plot_flat_excerpt

Spike

DOXY: spike statistic against the suspect and fail thresholds
DOXY: spike statistic against the suspect and fail thresholds
source: glidertest/plots_qc.py:plot_spike_stat

(6) QC — CHLA

CHLA: where glidertest's QC tests fire (gross range, spike, flat line) over the full record
CHLA: where glidertest's QC tests fire (gross range, spike, flat line) over the full record
source: glidertest/plots_qc.py:plot_test_hits
CHLA against depth: where the QC tests fire in the water column
CHLA against depth: where the QC tests fire in the water column
source: glidertest/plots_qc.py:plot_flag_profile

Current limits (applied)

  • CHLA gross range — suspect [0, 15], fail [-1, 20]
  • CHLA flat line — suspect ≥ 30 s, fail ≥ 60 s (tol ±0.01)
  • CHLA spike — suspect Δ > 1, fail Δ > 5

Suggested limits (this deployment) — copy into your config

The gross span is the central 99.9% of the finite values ([0.06, 1.38]) padded by 1% (suspect) and 5% (fail) of that span (lower bound clamped at 0). CHLA is sampled about every 1 s; a flat-line window needs to span a couple of its samples, so the suggested suspect is 10× and fail 20× that interval (a window shorter than the sampling flags every point). This is a starting point: if it flags too many points as flat-line, lengthen the window (raise suspect_threshold / fail_threshold) or lower the tolerance. The CHLA spike thresholds are not mission-derived; the applied values are shown so you can loosen them (raise suspect_threshold / fail_threshold) if real features are flagged. Users should verify that the recommended choices are appropriate for their dataset.

Flat-line runs

CHLA: flat-run durations against the test windows and the median sampling interval — applicable but unavailable: ValueError: CHLA: no flat-line flag to plot

CHLA: start-to-end change of each flat run against the tolerance (stuck sensor vs slow signal) — applicable but unavailable: ValueError: CHLA: no multi-sample flat run (flat flags are all isolated samples)

CHLA: zoom on the longest flagged flat run, with the ±tolerance band — applicable but unavailable: ValueError: CHLA: no flat-line flag to plot

Spike

CHLA: spike statistic against the suspect and fail thresholds
CHLA: spike statistic against the suspect and fail thresholds
source: glidertest/plots_qc.py:plot_spike_stat