← All missions

sea045_20221125T1222_D

QC

sea045_20221125T1222_D.ncgenerated 2026-11-12 20:58 UTC

Platform serial
SEA045
Profiles
1780 (890 dive, 890 climb)
Start
2022-11-25 12:22
End
2022-12-08 12:12
Duration
12d 23h
Dive depth
1–82 m
Lat
55.24°N–55.58°N
Lon
15.98°E–16.37°E
Sampling
1 s
Records
1,101,014
Size
401.0 MB
glidertest
(1) QC — glidertest diagnostics (2) Gross range (T–S) (3) QC — TEMP (4) QC — PSAL (5) QC — DOXY (6) QC — CHLA

(1) QC — glidertest diagnostics

Profile number: No issues detected. Profile duration: 201 profiles have abnormal duration.

glidertest diagnostics — run on the fly, not written to the file. Thresholds are glidertest's defaults unless a report config overrides them, shown so the verdict can be reproduced.

VariableTestSuspect range / thresholdFail range / thresholdSource
TEMPgross-range[0, 30][-2.5, 40]default
TEMPspike|Δ| > 2.0|Δ| > 6.0default
TEMPflat-lineflat ≥ 30 s (tol ±0.0005)flat ≥ 60 s (tol ±0.0005)default
TEMPhysteresis> 5% dive–climb error per depth bin> 5 bins exceeddefault
PSALgross-range[5, 38][2, 41]default
PSALspike|Δ| > 0.3|Δ| > 0.9default
PSALflat-lineflat ≥ 30 s (tol ±0.0005)flat ≥ 60 s (tol ±0.0005)default
PSALhysteresis> 5% dive–climb error per depth bin> 5 bins exceeddefault
DOXYgross-range[0, 350][0, 500]default
DOXYspike|Δ| > 10|Δ| > 50default
DOXYflat-lineflat ≥ 30 s (tol ±0.01)flat ≥ 60 s (tol ±0.01)default
DOXYhysteresis> 5% dive–climb error per depth bin> 5 bins exceeddefault
CHLAgross-range[0, 15][-1, 20]default
CHLAspike|Δ| > 1|Δ| > 5default
CHLAflat-lineflat ≥ 30 s (tol ±0.01)flat ≥ 60 s (tol ±0.01)default
CHLAhysteresis> 5% dive–climb error per depth bin> 5 bins exceeddefault

Test × variable: flagged-sample counts (per-sample tests show a small dashed bar). Gross range applies the suspect span only — the fail span above is not yet evaluated. Hysteresis counts depth bins with >5% dive–climb error; a variable is flagged when more than 5 bins exceed it.

TestTEMPPSALDOXYCHLA
Gross rangeclean100 susp 57 fail
164 susp
110 susp 2 fail
Spikeclean175 susp 487 fail
15,478 susp 1 fail
20 susp 1 fail
Flat line79 susp
cleancleanclean
Hysteresis (mean)0/84 bins0/84 bins33/84 bins3/84 bins
Hysteresis (range)0/84 bins0/84 bins7/84 bins10/84 bins

(2) Gross range (T–S)

Gross-range suspect and fail spans on the T–S diagram (TEMP × PSAL)
Gross-range suspect and fail spans on the T–S diagram (TEMP × PSAL)
source: glidertest/plots_qc.py:plot_ts_gross_range

Current gross-range limits (applied)

  • TEMP — suspect [0, 30], fail [-2.5, 40]
  • PSAL — suspect [5, 38], fail [2, 41]

Suggested gross-range limits (this deployment) — copy into your config

Each span is the central 99.9% of the finite values padded by 1% (suspect) and 5% (fail) of that span. Users should verify that the recommended choices are appropriate for their dataset.

(3) QC — TEMP

TEMP: where glidertest's QC tests fire (gross range, spike, flat line) over the full record
TEMP: where glidertest's QC tests fire (gross range, spike, flat line) over the full record
source: glidertest/plots_qc.py:plot_test_hits
TEMP against depth: where the QC tests fire in the water column
TEMP against depth: where the QC tests fire in the water column
source: glidertest/plots_qc.py:plot_flag_profile

Current limits (applied)

  • TEMP flat line — suspect ≥ 30 s, fail ≥ 60 s (tol ±0.0005)
  • TEMP spike — suspect Δ > 2, fail Δ > 6

Suggested limits (this deployment) — copy into your config

TEMP is sampled about every 1 s; a flat-line window needs to span a couple of its samples, so the suggested suspect is 10× and fail 20× that interval (a window shorter than the sampling flags every point). This is a starting point: if it flags too many points as flat-line, lengthen the window (raise suspect_threshold / fail_threshold) or lower the tolerance. The TEMP spike thresholds are not mission-derived; the applied values are shown so you can loosen them (raise suspect_threshold / fail_threshold) if real features are flagged. Users should verify that the recommended choices are appropriate for their dataset.

Flat-line runs

TEMP: flat-run durations against the test windows and the median sampling interval
TEMP: flat-run durations against the test windows and the median sampling interval
source: glidertest/plots_qc.py:plot_flat_runs
TEMP: start-to-end change of each flat run against the tolerance (stuck sensor vs slow signal)
TEMP: start-to-end change of each flat run against the tolerance (stuck sensor vs slow signal)
source: glidertest/plots_qc.py:plot_flat_change
TEMP: zoom on the longest flagged flat run, with the ±tolerance band
TEMP: zoom on the longest flagged flat run, with the ±tolerance band
source: glidertest/plots_qc.py:plot_flat_excerpt

Spike

TEMP: spike statistic against the suspect and fail thresholds
TEMP: spike statistic against the suspect and fail thresholds
source: glidertest/plots_qc.py:plot_spike_stat

(4) QC — PSAL

PSAL: where glidertest's QC tests fire (gross range, spike, flat line) over the full record
PSAL: where glidertest's QC tests fire (gross range, spike, flat line) over the full record
source: glidertest/plots_qc.py:plot_test_hits
PSAL against depth: where the QC tests fire in the water column
PSAL against depth: where the QC tests fire in the water column
source: glidertest/plots_qc.py:plot_flag_profile

Current limits (applied)

  • PSAL flat line — suspect ≥ 30 s, fail ≥ 60 s (tol ±0.0005)
  • PSAL spike — suspect Δ > 0.3, fail Δ > 0.9

Suggested limits (this deployment) — copy into your config

PSAL is sampled about every 1 s; a flat-line window needs to span a couple of its samples, so the suggested suspect is 10× and fail 20× that interval (a window shorter than the sampling flags every point). This is a starting point: if it flags too many points as flat-line, lengthen the window (raise suspect_threshold / fail_threshold) or lower the tolerance. The PSAL spike thresholds are not mission-derived; the applied values are shown so you can loosen them (raise suspect_threshold / fail_threshold) if real features are flagged. Users should verify that the recommended choices are appropriate for their dataset.

Flat-line runs

PSAL: flat-run durations against the test windows and the median sampling interval — applicable but unavailable: ValueError: PSAL: no flat-line flag to plot

PSAL: start-to-end change of each flat run against the tolerance (stuck sensor vs slow signal) — applicable but unavailable: ValueError: PSAL: no multi-sample flat run (flat flags are all isolated samples)

PSAL: zoom on the longest flagged flat run, with the ±tolerance band — applicable but unavailable: ValueError: PSAL: no flat-line flag to plot

Spike

PSAL: spike statistic against the suspect and fail thresholds
PSAL: spike statistic against the suspect and fail thresholds
source: glidertest/plots_qc.py:plot_spike_stat

(5) QC — DOXY

DOXY: where glidertest's QC tests fire (gross range, spike, flat line) over the full record
DOXY: where glidertest's QC tests fire (gross range, spike, flat line) over the full record
source: glidertest/plots_qc.py:plot_test_hits
DOXY against depth: where the QC tests fire in the water column
DOXY against depth: where the QC tests fire in the water column
source: glidertest/plots_qc.py:plot_flag_profile

Current limits (applied)

  • DOXY gross range — suspect [0, 350], fail [0, 500]
  • DOXY flat line — suspect ≥ 30 s, fail ≥ 60 s (tol ±0.01)
  • DOXY spike — suspect Δ > 10, fail Δ > 50

Suggested limits (this deployment) — copy into your config

The gross span is the central 99.9% of the finite values ([7.38, 326.61]) padded by 1% (suspect) and 5% (fail) of that span (lower bound clamped at 0). DOXY is sampled about every 1 s; a flat-line window needs to span a couple of its samples, so the suggested suspect is 10× and fail 20× that interval (a window shorter than the sampling flags every point). This is a starting point: if it flags too many points as flat-line, lengthen the window (raise suspect_threshold / fail_threshold) or lower the tolerance. The DOXY spike thresholds are not mission-derived; the applied values are shown so you can loosen them (raise suspect_threshold / fail_threshold) if real features are flagged. Users should verify that the recommended choices are appropriate for their dataset.

Flat-line runs

DOXY: flat-run durations against the test windows and the median sampling interval — applicable but unavailable: ValueError: DOXY: no flat-line flag to plot

DOXY: start-to-end change of each flat run against the tolerance (stuck sensor vs slow signal) — applicable but unavailable: ValueError: DOXY: no multi-sample flat run (flat flags are all isolated samples)

DOXY: zoom on the longest flagged flat run, with the ±tolerance band — applicable but unavailable: ValueError: DOXY: no flat-line flag to plot

Spike

DOXY: spike statistic against the suspect and fail thresholds
DOXY: spike statistic against the suspect and fail thresholds
source: glidertest/plots_qc.py:plot_spike_stat

(6) QC — CHLA

CHLA: where glidertest's QC tests fire (gross range, spike, flat line) over the full record
CHLA: where glidertest's QC tests fire (gross range, spike, flat line) over the full record
source: glidertest/plots_qc.py:plot_test_hits
CHLA against depth: where the QC tests fire in the water column
CHLA against depth: where the QC tests fire in the water column
source: glidertest/plots_qc.py:plot_flag_profile

Current limits (applied)

  • CHLA gross range — suspect [0, 15], fail [-1, 20]
  • CHLA flat line — suspect ≥ 30 s, fail ≥ 60 s (tol ±0.01)
  • CHLA spike — suspect Δ > 1, fail Δ > 5

Suggested limits (this deployment) — copy into your config

The gross span is the central 99.9% of the finite values ([0.05, 0.41]) padded by 1% (suspect) and 5% (fail) of that span (lower bound clamped at 0). CHLA is sampled about every 1 s; a flat-line window needs to span a couple of its samples, so the suggested suspect is 10× and fail 20× that interval (a window shorter than the sampling flags every point). This is a starting point: if it flags too many points as flat-line, lengthen the window (raise suspect_threshold / fail_threshold) or lower the tolerance. The CHLA spike thresholds are not mission-derived; the applied values are shown so you can loosen them (raise suspect_threshold / fail_threshold) if real features are flagged. Users should verify that the recommended choices are appropriate for their dataset.

Flat-line runs

CHLA: flat-run durations against the test windows and the median sampling interval — applicable but unavailable: ValueError: CHLA: no flat-line flag to plot

CHLA: start-to-end change of each flat run against the tolerance (stuck sensor vs slow signal) — applicable but unavailable: ValueError: CHLA: no multi-sample flat run (flat flags are all isolated samples)

CHLA: zoom on the longest flagged flat run, with the ±tolerance band — applicable but unavailable: ValueError: CHLA: no flat-line flag to plot

Spike

CHLA: spike statistic against the suspect and fail thresholds
CHLA: spike statistic against the suspect and fail thresholds
source: glidertest/plots_qc.py:plot_spike_stat